Axkid Attachment Loops Designed to make fitting the anchor straps to the vehicle easier. Loops are simply bolted to the vehicle seat runners to ease installation especially if moving the car seat between vehicles.
Axkid Tether Straps. Replacement or spare tether straps for Axkid Extended Rearfacing Car Seats. Suitable for rearfacing installation and to provide achorage points for vehicles without integrated anchors. Suitable to fit the Kidzone, Minikid and Rekid seats.
Axkid Tether Straps - Move. Replacement or spare tether straps for the Axkid Move Extended Rearfacing Car Seat. Suitable for rearfacing installation and to provide achorage points for vehicles without integrated anchors. Suitable to fit the Move car seat only for the Kidzone, Minikid and Rekid seats please a different set of straps is required.
Axkid Wedge The Axkid wedge is designed to fit under the support leg of the Minikid seat when installed into a car with deeply sloping seats or seats on a steep angle. This aides fitting and enhances the recline position.
There is an inherent problem with a group 2 seat (for children over 15kg or approx. 4 years old). Children have moved from the support offered by the 5 point harnessed seats to one strap across the chest and lap. When they fall asleep they can fall forward out of the seat. The shoulder strap slowly releases and the child is left in a dangerous (see crash test data) and uncomfortable position. Belt…
NEW BeSafe Beltguard (for BeSafe Seats Only). Attaching to the shoulder straps on the BeSafe seats the NEW Beltguard from BeSafe used to "hold" the car seat shoulder straps closer together to help prevent an active child from getting their arms out of the harness.
BeSafe Tether Straps for Belt fitted iZi Kid or Combi. A spare set of tethers for the BeSafe range of car seats that require tethers. Ideal for use where the range on beltfitted seats are transfered from car to car.
Reclines iZi Sleep iZi Kid and iZi Combi10 degrees extra when the angle of this car seat is too upright. Only to be used on vehicle seat angles greater than 10 degrees. Please note this item is to be used only with belt fitted models not for use with Isofix products. This product can either be used under the seat unit to lift the "foot" of the seat or can be used to give extra support to the back…
Britax Max Way Spare Fixing Tethers A spare set of tether straps to either replace lost or damaged straps or maybe to ease fitting if the seat is transfered between cars. These are the original tethers that clip onto the seat. For the new Max-Way II with the seat belt attachment tethers please order the Two Way/Multi Tech version.
Britax Replacement Tether Straps This set of replacement tether straps is designed for use with the 2-Way, Hi-Way or Multi-Tech car seats. Ideal for use in a second car if the seat is regularly moved. These also work with the newer Max Way Black Series (black shell seat) model. These tethers use a car seat belt type fitting at the rear of the seat. Please note the webbing of the straps maybe silve…
Britax's Duo Plus car seat can be installed in a wide range of vehicles, but is only approved for use in certain makes and models if it is used with this performance pad, which ensures the infant car seat fits safely and securely. The following vehicles need the addition of the performance pad: BMW, Mitsubishi, Colt (3 and 5 door), Smart Forfour and Fortwo, Suzuki Swift (EZ, MZ). The performance p…
Britax Secura Foam Wedge A foam wedge designed for use with the Britax Max Way car seat. The wedge is used to support and lift the reclining bar under the Max Way seat to either recline the seat or to fill the gap if used in a car with steeply sloped or bucket profile.
Britax Duo Plus car seat can be installed using your car's ISOFIX system. When you use this method of installation, you can also add this top tether to give the seat extra stability. The top tether is a belt at the top of the child seat that attaches to anchorage points in the car. It limits the rotational movement of the child seat, reducing the child's forward movement in the event of an acciden…
Diono Radian 5 Angle Adjuster If the Radian is too reclined in the vehicle or takes up too much space then this angle adjuster makes the seat more upright (do not use this position for a newborn child who needs to be reclined) and also makes it more compact in the car.
Diono Sit Rite A dense foam support roll that is used to level out rear facing car seats when used in cars with a steep slope or bucket. It can be used in conjunction with just the seat or also with some base units. Not only does it help level the seat but in some cases helps reduce lateral movement also making for a safer more secure fit.
We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.