Car Seat Spares

Axkid ASIP Side Impact Block. Replacement ASIP block to fit Minikid 2, Move and Modukid Axkid car seats.

White plastic rod to attach the seat cover behind the childs back under the shoulder harness. It simply slides into the fabric and sits into the slot in seat shell.

Black plastic pronged (Xmas Tree) strip for attaching the Axkid seat cover between the childs legs. This strip folds inside the seat fabric and pushes into the holes at the front of the seat shell. Suitable for all Minikid models also the Move and ReKid.

Axkid Side Retractor - Left. Ratcheted side retractor for Minikid and Minikid 2 models. These are marked on the clip with R or L depending on the side and are marked as looking at the seat from the front. Simply attached using the long bolt and nut already in the seat. These are not included. Please note the image is just for illustration please check the printing on the latch for an R or L to get…

Axkid Side Retractor - Right. Ratcheted side retractor for Minikid and Minikid 2 models. These are marked on the clip with R or L depending on the side and are marked as looking at the seat from the front. Simply attached using the long bolt and nut already in the seat. These are not included. Please note the image is just for illustration please check the printing on the latch for an R or L to ge…

Axkid Textile Buckle Cover - Tar Replacement buckle cover for all Axkid ERF Car Seats. In the Tar fabric to match the Minikid and Move seats but will fit all other ERF Axkid seats only the fabric texture will be slightly different.

Complete Foot Floor Support. Replacement complete foot floor support for the iZi Modular Base, iZi Twist, Turn and Stretch seat models. Simply remove the Torx screw at the base of the support leg, remove the floor support and replace. Then re screw the support into place.

i-Size Base Foot Container. Replacement i-Size base Yellow foot container, also fits Stretch. Fits over the foot of the support leg to stop it "beeping" or getting damaged when the seat is not in use. Please remove the sleeve from the leg when using the seat in the vehicle.

Front brace to fit BeSafe iZi Combi X4 and iZi Kid X3 Isofix car seats. This is a replacement to fit in the place of the one originally supplied with the seat unit. Please note it is for these 2 models only.

Replacement SIP+ for iZi Combi/Kid/Comfort. Removable SIP unit for use with several models of BeSafe seats car seats. Fits: iZi Kid X3/X2/X1 isize iZi Kid isize iZi Kid X3 Isofix iZi Plus iZi Combi X3, Combi X3 Isofix iZi Combi X4 Isofix iZi Comfort X3 iZi Comfort X3 Isofix The SIP aids side impact performance in an accident situation. Can be fitted to either side of the car seat. This SIP will ON…

BeSafe EPS Fastener Screw. Replacement fastener screw for EPS panels on iZi Combi/Kid and Plus models.